| |
 C.V.Axle |
| This is the optimum sliding joint for the drive shaft, of which such high performance is demanded… |
| |
| Outer C.V.Joint |
| This type of joint was invented in 1920 by a Dana engineer named Alfred H. Rzeppa… |
| |
| Inner C.V.Joint |
| Tripod joints do not have balls but instead use needle bearing rollers mounted on a three-legged spider… |
| |
| Components |
| Also called bellows, these are the protective rubber (synthetic or natural) or hard plastic… |
| |
|
 |
|
| |
| Display: SKODA - OCTAVIA |
Back>> |
|
| Detail |
Year Vehicle Construction |
Teeth of Outer Spline |
Teeth of Inner Spline |
Seal Diameter (mm) |
Teeth of ABS Ring |
Groove Position: Inside/ Middle/ Outside |
Outside Diameter (mm) |
FZ Number |
Outer/ Inner Joint |
| 1.3 41/46 KW(56-62 HP) |
08/87 |
22 |
22 |
56.6 |
N |
I |
81 |
FZ1SO01 |
O |
| 1.6,SW,(A.T.) MOD.1U 55/74 KW(75-101 HP) |
09/96 |
36 |
30 |
53.2 |
N |
I |
90 |
FZ1VW12 |
O |
| 1.6,SW,(M.T.) MOD.1U 55/74 KW(75-101 HP) |
09/96 |
36 |
30 |
53 |
N |
I |
81 |
FZ1VW15 |
O |
| 1.8 20V (A.T./M.T.) MOD.1U 92KW(125 HP) |
09/96 |
36 |
30 |
53.2 |
N |
I |
90 |
FZ1VW12 |
O |
| 1.8 TURBO(M.T.) MOD.1U 110 KW(149 HP) |
09/96 |
36 |
30 |
53.2 |
N |
I |
90 |
FZ1VW12 |
O |
| 1.9 SDI,SW,(M.T.) MOD.1U 50 KW(68 HP) |
07/98 |
36 |
30 |
53 |
N |
I |
81 |
FZ1VW15 |
O |
| 1.9 TURBO DIESEL (A.T./M.T.) 66 KW (90 HP) |
09/96 |
36 |
30 |
53.2 |
N |
I |
90 |
FZ1VW12 |
O |
|
| Displaying 1 to 7 (of 7 products) |
|
|
|
|
